Type U2 Concrete Lintel 100MM x 150MM x 2100MM

Vendor Code: LINTEL0035

Size : 100mm wide x 150mm deep x 2100mm long.

Supplier code : Type U2.

U2 Lintel can be reversed to achieve 150mm wide x 100mm deep.

Types C, D, & U2 are designed to withstand direct imposed loads.

Rafters, wall plates and floor joists may be accommodated as directly imposed loads.

BEARING: Minimum of 150mm each side or as directed by the structural engineer.

PROPPING: Propping is not required with this type of lintel.

BRICKWORK: Non-composite lintels do not require brickwork bonded to them. Point loads from girders, trusses, steel beams ect. require to be referred to our Customer Advisory Service.

POSITIONING: Lintels must be placed with wire in correct position. Lintels are marked top.

All lintels are designed in accordance with – BS 5977: Part 1: 1981, BS EN 845-2: 2103, BS 8110: Part 1: 1985, BS 8110: Part 2: 1985.