HOW TO BUILD A FENCE USING FENCE SLATS

If you’re after something a little more contemporary looking but your budget won’t stretch to Cedar then a slatted fence could be your answer.

The benefits of a slatted fence are that you can create a bespoke design by using different size battens and spacing.

Preparation

Measure the exact length of where you want to build a slatted fence.

If you’re using existing fence posts bear in mind softwood battens can bow over time, so we would advise fitting posts in between if the space is over 1.8m. This allows you to secure the wood a bit more than if it was fastened at larger intervals.

Decide on the height you’d like your fence to be, then work out the order and pattern you’d like your slats to be. Don’t forget anything over 2m requires planning permission.

Build

1. Install the fence posts - you may need to use a Posthole Digger for digging postholes and removing debris.

First, you need to install the fence posts if you are not attached to existing posts or are adding strength between the posts.

2. Starting to add the slats

Most of the hard work is done now, and this stage shouldn’t take as long.

Starting with the bottom row, attach the first piece of timber. Make sure it’s perfectly level, as this piece will be the guide for all others.

Once the full first row is installed, lay a placeholder piece on top of the panel. This will be the visible gap between the panels. Use some offcuts of wood that are still lying around, but you could use anything as long as it’s firm.

Tip – try layering a few battens before you start nailing to make sure you are happy with the space between.

Then lay your second slat onto the placeholders, push it down firmly and nail into place. Remove the placeholder pieces and lay them on top of your new slatted panel piece. Add the next panel, nail it into place and repeat the process until you reach the top of the fence posts.

3. Bring out the natural beauty.

If you want to bring out the natural grains in the wood and create a deeper colour, then finishing off with an oil or stain can help you achieve this look.

4. Stand back and admire your new slatted fence.